Tonight I worked on steps 13 and 14 on page 55 of the manual. On these steps, the crystals are grounded to the circuit board. Crystals X5 & X6 use a single ground wire from the top of the crystal to the circuit board. Crystals X7 - X11 use two ground wires from the sides of the crystal to the circuit board.
 |
| Crystals X7 - X11 use 2 ground wires from the sides to the circuit board |
 |
| Crystals X7 - X11 use 2 ground wires from the sides to the circuit board |
 |
| Crystals X5 & X6 use a single ground wire from the top of the Crystal to the circuit board |
No comments:
Post a Comment